Home

TE91 PRECISION ROTARY VACUUM TRIBOMETER  

(진공 환경 마찰마모윤활 시험기)

최저 진공 압력 시험 사양-->  10-5 Pa=10-10 Bar=7.5 x 10-8 Torr

=

모델 TE91 PRECISION ROTARY VACUUM TRIBOMETER

                                    

           4 BALL 시험장치                   면접촉 형상 트러스트 워셔 시험장치

 

                                    

 1 PIN OR 3 PIN 온 디스크 시험장치               Spirall Orbit 시험장치         

Test Assembly with Capacitance Probe

                                                   

4BALL 시험장치                                1 PIN OR 3 PIN 온 디스크 시험장치                             Spirall Orbit 시험장치      

 

 

aniblue12_next.gif다양한 마찰마모윤활 시험기 리스트 항목 

                                                                        

TE 91 초진공환경 회전식 마찰마모윤활 시험기기

 

Technical Specifications

Tribometer
Load: 20 to 2000 N
Rotational Speed: 10 to 1700 rpm
Maximum Friction Torque: 5 Nm
Load Actuation: Pneumatic Bellows
   
Test Configurations: Four ball wear (ASTM D2266)
Thrust washer (ASTM D3702)
Three pin on disc (ASTM G99)
Spiral orbit ball on disc (ASTM F2661)
Motor Type: Servo with encoder feedback
   
Roughing Pump: Rotary vane pump
Vacuum Pump: Turbomolecular
Interface: Phoenix Tribology USB micro-controller interface
Software: COMPEND 2020
Test Chamber
Vacuum: Down to 100 Picobar (10-5 Pa)
Environment: Air, inert gas or vacuum
Material: 304 stainless steel
Surface Treatment: Glass bead blasted
Viewports: Fused Silica
Electrical Feedthrough: 1 kVolts , 15 Ampere
Coaxial Feedthrough: BNC through Flange
Thermocouple: Type K through Flange
Vacuum Transducer: Cold Cathode and Pirani
Leak rate: < 10-7 mbar l/s
Rotary Feedthrough: Pressure up to 10-7 Pa
Rotary Feedthrough: Temperature up to 80ºC
Computer Controlled Parameters Rotational Speed
Test Duration
Load
Manually Controlled Parameters Operating Pressure
Recorded Parameters – Sliding Friction & Wear Load
Rotational Speed
Friction Torque
Temperature
Operating Pressure
Electrical Contact Potential
Number of Revolutions
Test Duration
Sliding Speed
Sliding Distance
Recorded Parameters – Rolling Contact Fatigue Load
Rotational Speed
Scrub Force
Temperature
Operating Pressure
Electrical Contact Potential
Number of Revolutions
Number of Ball Orbits
Test Duration
Services
Electricity: 220/240V, single phase, 50 Hz, 3 kW
110/120 V, single phase, 60 Hz, 3 kW

 

 한미산업 

전화 :  02 - 3411- 0173    팩스 :  02 - 3411 - 0178 

sales@gohanmi.com

2001-2005 Hanmi Industries Ltd. All rights reserved

.