Home

Device Torque Testing

Torque Test-All II(디지털 토오크 측정기)

                                                 베어링 전용  토오크 & 마찰력 측정기를 보고 싶으시면

[Photo of the Test-All II Vertical]Test-all II Vertical

 

[Photo of the Test-All II Horizontal]

Test-All II Horizontal

As the industry leader in the precision torque test equipment market, Vibrac continues to develop advanced technological solutions to industrial testing problems. Over fifty years of experience in the field of torque measurement has resulted in the development of this patented digital measuring system. Torque Testing… Made Easy!

The new Test-All II, with a windows-based control software, and touch screen display and interface, torque testing is now simple, accurate and affordable. This compact system measures and stores test results at the touch of a button. Features include:

  • Simple touch screen programming
  • Automatic testing and data logging
  • Completely calibratable in the field
  • NIST Traceable calibration
  • Instant on; no warm-up period
  • Wide operating temperature range
  • Mechanical overload protection
  • RS 232 output port
  • USB data upload/download port
  • Full one-year warranty

Test-All II Easily Selected Test Features

From a simple move test to a multi-cycle bi-directional test, with run-ins and naps, the Test-All II does it all.

Select a Profile From Memory

A library of tests can be easily created to make the operators job simple and efficient.

Calibrate On-Site

On-screen instructions and pictures guide the user through the complete calibration process.

Built for the Factory Environment

This metal-housed unit with its abrasion-resistant finish can withstand the dust and liquid spills that occur during normal factory use. The display screen arm and housing are made using heavy gage aluminum to prevent damage from lifting, bumping and other common impact situations.

Easy-to-Use Test-All II

The Model 1560 Test-All II is an innovative, cost-effective bench top system for measuring the torque characteristics of rotating devices. Easy-to-use programming features enable the user to tailor a test to the requirements of almost any application.

 

 

Programming Features 

  • Uni-directional Test:  This test will rotate the DUT (Device Under Test) in the direction selected on the keypad and the peak torque will be measured and displayed. The test results can be saved in memory or outputted through the RS 232 port. The test speed and the distance or time to test is programmable.
  • Bi-directional Test:  This test will rotate the DUTin both directions and the peak torque will be measured and displayed.  Both measured values will be displayed and can be stored in memory and outputted.  As in the single direction, the test speed and the distance or time to test is programmable.
  • Set Torque Test:  This test will rotate the DUT in the direction selected until the set torque is achieved or the torque drops off suddenly. If the desired torque is not reached the drop off value will be captured and displayed.  Once again the results can be stored or outputted.  This test can be performed in either or both directions and at a programmable speed.
  • Multi-Tests:  The tests described above can be performed a programmable number of times, with naps between tests, to life test a device.

 

Download our brochure for additional information!

 

 한미산업 

전화 :  02 - 3411- 0173    팩스 :  02 - 3411 - 0178 

sales@gohanmi.com

2001-2005 Hanmi Industries Ltd. All rights reserved
sales@gohanmi.com